Cisco/CallManager Express/Show version
目次
show version
IOSによって、VoIPサポートの有無、プロトコルサポートの有無など、腐るほど種類があるので
必ず確認すること
#show version Cisco IOS Software, 2801 Software (C2801-SPSERVICESK9-M), Version 12.4(11)T1, RELEASE SOFTWARE(fc5) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2007 by Cisco Systems, Inc. Compiled Thu 25-Jan-07 14:24 by prod_rel_team ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) router uptime is 14 weeks, 5 hours, 29 minutes System returned to ROM by power-on System restarted at 09:27:45 JST Sat May 24 2008 System image file is "flash:c2801-spservicesk9-mz.124-11.T1.bin" This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. Cisco 2801 (revision 6.0) with 236544K/25600K bytes of memory. Processor board ID FHK1106F1XD 2 FastEthernet interfaces 2 ISDN Basic Rate interfaces 1 DSP, 8 Voice resources DRAM configuration is 64 bits wide with parity disabled. 191K bytes of NVRAM. 62720K bytes of ATA CompactFlash (Read/Write) Configuration register is 0x2102
show telephony-service
IOSに載っているCMEのバージョンを確認する。
バージョンによって、認識できるIP電話が判るので重要なコマンドとなる。
CME 3.0
Cisco1750#show telephony-service CONFIG (Version=3.0) ===================== Cisco CallManager Express ip source-address 192.168.0.249 port 2000 max-ephones 5 max-dn 10 max-conferences 4 max-redirect 5 以下略
CME 3.3
Router#show telephony-service CONFIG (Version=3.3) ===================== Version 3.3 Cisco CallManager Express For on-line documentation please see: www.cisco.com/univercd/cc/td/doc/product/access/ip_ph/ip_ks/index.htm ip source-address 0.0.0.0 port 2000 max-ephones 8 max-dn 0 max-conferences 4 gain -6 dspfarm units 0 dspfarm transcode sessions 0 hunt-group report delay 1 hours 以下略
CME 4.0
Router#show telephony-service CONFIG (Version=4.0(2)) ===================== Version 4.0(2) Cisco Unified CallManager Express For on-line documentation please see: www.cisco.com/univercd/cc/td/doc/product/access/ip_ph/ip_ks/index.htm ip source-address 192.168.0.54 port 2000 service dss load 7905 CP7905080003SCCP070409A.sbin 以下略
CME 7.0
Router#show telephony-service CONFIG (Version=7.0(1)) ===================== Version 7.0(1) Cisco Unified Communications Manager Express For on-line documentation please see: http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_series_home.html ip source-address 0.0.0.0 port 2000 max-ephones 0 max-dn 0 max-conferences 4 gain -6 dspfarm units 0 dspfarm transcode sessions 0 conference software 以下略
