Cisco/CallManager Express/Show version

show version

IOSによって、VoIPサポートの有無、プロトコルサポートの有無など、腐るほど種類があるので
必ず確認すること

#show version
Cisco IOS Software, 2801 Software (C2801-SPSERVICESK9-M), Version 12.4(11)T1, RELEASE SOFTWARE(fc5)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Thu 25-Jan-07 14:24 by prod_rel_team

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

router uptime is 14 weeks, 5 hours, 29 minutes
System returned to ROM by power-on
System restarted at 09:27:45 JST Sat May 24 2008
System image file is "flash:c2801-spservicesk9-mz.124-11.T1.bin"

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html 

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 2801 (revision 6.0) with 236544K/25600K bytes of memory.
Processor board ID FHK1106F1XD
2 FastEthernet interfaces
2 ISDN Basic Rate interfaces
1 DSP, 8 Voice resources
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62720K bytes of ATA CompactFlash (Read/Write) 

Configuration register is 0x2102

show telephony-service

IOSに載っているCMEのバージョンを確認する。
バージョンによって、認識できるIP電話が判るので重要なコマンドとなる。

CME 3.0

Cisco1750#show telephony-service
CONFIG (Version=3.0)
=====================
Cisco CallManager Express
ip source-address 192.168.0.249 port 2000
max-ephones 5
max-dn 10
max-conferences 4
max-redirect 5
以下略

CME 3.3

Router#show telephony-service
CONFIG (Version=3.3)
=====================
Version 3.3
Cisco CallManager Express
For on-line documentation please see:
www.cisco.com/univercd/cc/td/doc/product/access/ip_ph/ip_ks/index.htm

ip source-address 0.0.0.0 port 2000
max-ephones 8
max-dn 0
max-conferences 4 gain -6
dspfarm units 0
dspfarm transcode sessions 0
hunt-group report delay 1 hours
以下略

CME 4.0

#show telephony-service
CONFIG (Version=4.0(2))
=====================
Version 4.0(2)
Cisco Unified CallManager Express
For on-line documentation please see:
www.cisco.com/univercd/cc/td/doc/product/access/ip_ph/ip_ks/index.htm

ip source-address 192.168.0.54 port 2000
service dss
load 7905 CP7905080003SCCP070409A.sbin
以下略

外部リンク

CMEとCisco IOSバージョンの互換表